Signs Your Chimney Is Leaking (and Where the Water Gets In)

Water is the number one enemy of masonry chimneys. Learn the warning signs of a leak and the four places water usually gets in.

Most chimney leaks come from flashing, the crown, a missing cap or porous masonry.

The stain inside is often far from where water enters.

Freeze-thaw cycles turn small leaks into masonry damage.

Waterproofing should be breathable, never paint or a non-breathable sealer.

A chimney leak rarely announces itself all at once. It usually starts as a small stain, a damp smell or a little rust on the damper, then gets worse each season as water works its way into the masonry.

Warning signs

Water stains on the ceiling or walls next to the chimney; A musty or damp smell from the fireplace after rain; Rust on the damper, firebox or fireplace doors; White powdery staining on the brick (efflorescence); Crumbling mortar or flaking brick faces

The four usual suspects

Flashing: the metal seal where the chimney meets the roof. It lifts, rusts or gets patched with caulk that fails.; The crown: the cement top of the chimney. Cracks let water straight into the structure.; The cap: without one, rain falls directly down the flue.; The masonry itself: brick and mortar are porous and absorb water over time.

Why it gets worse in winter

Water that soaks into brick and mortar freezes, expands and breaks the material apart from the inside. Each freeze-thaw cycle makes the cracks bigger, which lets in more water next time. That is how a small leak becomes a rebuild.

About waterproofing: Masonry needs a breathable water repellent that keeps liquid water out but lets vapor escape. Paint and non-breathable sealers can trap moisture inside the brick and speed up freeze damage.

What to do

Have the source traced before anything is repaired. Fixing the flashing will not help if the crown is the problem. A proper inspection finds the entry point so you only pay for the fix that works.

Sources: National Fire Protection Association, NFPA 211: Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances (https://www.nfpa.org/codes-and-standards/nfpa-211-standard-development/211)

Call or text (757) 589-0783