Creosote is the flammable residue every wood fire leaves in your chimney. Here is how it forms, the three stages, and how to keep it under control.
Creosote forms when smoke cools and condenses on the inside of the flue.
It is combustible, and buildup in the flue is a leading cause of chimney fires.
Glazed, tar-like creosote is the hardest to remove and the most dangerous.
Dry wood, hot fires and annual inspections keep it in check.
Creosote is what is left behind when wood smoke cools on its way up the chimney. Gases, unburned wood particles and moisture condense on the cooler walls of the flue and stick there. Over a season, that coating builds up, and creosote burns.
Why it matters
A thick layer of creosote can ignite if a hot fire sends enough heat or a spark up the flue. Chimney fires can crack flue liners, damage masonry and spread to the structure of the house. The U.S. Fire Administration identifies creosote buildup as a leading cause of chimney fires and recommends annual inspection and cleaning.
The three stages
Stage one: loose, flaky soot. Easy to brush out during a normal cleaning.; Stage two: crunchy, tar-flecked deposits. Takes more work to remove and signals cooler, smokier fires.; Stage three: glazed creosote. A shiny, hard coating that is difficult to remove and very flammable. It usually needs specialized treatment.
What makes it build faster
Burning wet or unseasoned wood; Low, smoldering fires with the air supply turned down; A flue that is too large for the appliance, so smoke cools quickly; Cold exterior chimneys that cool smoke before it exits
A simple wood test: Seasoned firewood is lighter, has cracks in the ends and sounds hollow when two pieces are knocked together. If it hisses or bubbles in the fire, it is still wet.
How to keep it under control
Burn dry, seasoned wood, give fires enough air to burn hot and bright, and have the chimney inspected every year. The inspection tells you how much buildup there is and how fast it is forming, which tells you how often you need cleaning.
Sources: U.S. Fire Administration (FEMA), Heating fire safety (https://www.usfa.fema.gov/prevention/home-fires/prevent-fires/heating/); National Fire Protection Association, NFPA 211: Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances (https://www.nfpa.org/codes-and-standards/nfpa-211-standard-development/211); U.S. Environmental Protection Agency, Burn Wise: best wood-burning practices (https://www.epa.gov/burnwise/best-wood-burning-practices)